|
MOQ: | 1 Set |
Price: | Negotiable |
Standard Packaging: | Wooden case without need of fumigation |
Delivery Period: | 7days-35days |
Payment Method: | TT,LC |
Supply Capacity: | 25 sets per month |
Different standards remote control interface connector metal progresssive die
Progressive stamping is a metalworking method that can encompass punching, coining, bending and several other ways of modifying metal raw material, combined with an automatic feeding system.
The feeding system pushes a strip of metal (as it unrolls from a coil) through all of the stations of a progressive stamping die. Each station performs one or more operations until a finished part is made. The final station is a cutoff operation, which separates the finished part from the carrying web. The carrying web, along with metal that is punched away in previous operations, is treated as scrap metal. Both are cut away, knocked down (or out of the dies) and then ejected from the die set, and in mass production are often transferred to scrap bins via underground scrap material conveyor belts.
The progressive stamping die is placed into a reciprocating stamping press. As the press moves up, the top die moves with it, which allows the material to feed. When the press moves down, the die closes and performs the stamping operation. With each stroke of the press, a completed part is removed from the die.
The dies are usually made of tool steel to withstand the high shock loading involved, retain the necessary sharp cutting edge, and resist the abrasive forces involved.
The cost is determined by the number of features, which determine what tooling will need to be used. It is advised to keep the features as simple as possible to keep the cost of tooling to a minimum. Features that are close together produce a problem because it may not provide enough clearance for the punch, which could result in another station. It can also be problematic to have narrow cuts and protrusions.
Metal Stamped Parts & Components
We stamp metal parts ranging from small precision parts, such as electronic equipment and musical instruments, to large precision components, including processing equipment and architectural components that are decorative and functional. All-New Stamping has the capability to work in quantities from prototype runs to full production runs.
Our stock thickness for our ferrous and non-ferrous metals ranges from 0.01mm to 2mm and the stock width ranges from 10mm to 1000mm with pre-plated and finishing options. We also work with a complete range of materials to offer customers a large choice in specifications, including:
Steel
Aluminum
Stainless Steel
Plastics
Copper
Brass
Specialty Metals
Mould building process
Step | Item | high speed stamping die |
1 | Quotation | Quote competitive price according to your details (drawing or sample, and related requirements). |
2 | Order | Sign agreement after confirming price |
3 | Mould design | Design the mould structure drawing according to your product drawing or sample, |
then send the tooling drawings to you for confirmation. | ||
4 | Mould making | After your confirmation of our drawing, we begin to make the moulds, |
during manufacturing program, | ||
we send you mould building progress with pictures every week, for you to know our process. | ||
5 | First trial | We will make the stamping die first trial on time, then send you video or picture |
and trial samples for you to confirm. | ||
Or you can also come to our factory .And we will inspect them and issue the report. | ||
6 | Quality confirm | You will confirm our stamping die quality according to sample. |
If you need to adjust the product structure, we can help you to change it further. | ||
7 | Delivery | Ship the stamping die after it is completely OK, packed by wooden case. |
To get quick response, please contact us by mail directly
Q: How can I get quotation quickly
A: Please send your inquiry and technical details to email kellylan10@hotmail.com Our sales Consultand will contact you in 24hrs on business time.
Q: How can I get technical support from you when we are designing a new product?
A: Please feel free to contact with the same email .There will be an exclusive engineer available for you.
Q: How can I contact you when I have some suggestion about your products or service?
A: Please feel free to contact email or phone.We will follow on your suggestion and try our best to make you satisfied.
We accept your any request on shipment.By air, by sea,and by Express are acceptable.
By Express | By Air | By Sea | |
West Europe | 3-5 days | 4-6 days | 22-30days |
USA &Canada | 3-4days | 5-6 days | 16-27days |
South Asia | 3-5 days | 3-7 days | 12-20 days |
Japan&South Korea | 2-3 days | 3-4 days | 10-13 days |
Russia | -------- | --------- | 30-40 days |
Stamping die details:
|
MOQ: | 1 Set |
Price: | Negotiable |
Standard Packaging: | Wooden case without need of fumigation |
Delivery Period: | 7days-35days |
Payment Method: | TT,LC |
Supply Capacity: | 25 sets per month |
Different standards remote control interface connector metal progresssive die
Progressive stamping is a metalworking method that can encompass punching, coining, bending and several other ways of modifying metal raw material, combined with an automatic feeding system.
The feeding system pushes a strip of metal (as it unrolls from a coil) through all of the stations of a progressive stamping die. Each station performs one or more operations until a finished part is made. The final station is a cutoff operation, which separates the finished part from the carrying web. The carrying web, along with metal that is punched away in previous operations, is treated as scrap metal. Both are cut away, knocked down (or out of the dies) and then ejected from the die set, and in mass production are often transferred to scrap bins via underground scrap material conveyor belts.
The progressive stamping die is placed into a reciprocating stamping press. As the press moves up, the top die moves with it, which allows the material to feed. When the press moves down, the die closes and performs the stamping operation. With each stroke of the press, a completed part is removed from the die.
The dies are usually made of tool steel to withstand the high shock loading involved, retain the necessary sharp cutting edge, and resist the abrasive forces involved.
The cost is determined by the number of features, which determine what tooling will need to be used. It is advised to keep the features as simple as possible to keep the cost of tooling to a minimum. Features that are close together produce a problem because it may not provide enough clearance for the punch, which could result in another station. It can also be problematic to have narrow cuts and protrusions.
Metal Stamped Parts & Components
We stamp metal parts ranging from small precision parts, such as electronic equipment and musical instruments, to large precision components, including processing equipment and architectural components that are decorative and functional. All-New Stamping has the capability to work in quantities from prototype runs to full production runs.
Our stock thickness for our ferrous and non-ferrous metals ranges from 0.01mm to 2mm and the stock width ranges from 10mm to 1000mm with pre-plated and finishing options. We also work with a complete range of materials to offer customers a large choice in specifications, including:
Steel
Aluminum
Stainless Steel
Plastics
Copper
Brass
Specialty Metals
Mould building process
Step | Item | high speed stamping die |
1 | Quotation | Quote competitive price according to your details (drawing or sample, and related requirements). |
2 | Order | Sign agreement after confirming price |
3 | Mould design | Design the mould structure drawing according to your product drawing or sample, |
then send the tooling drawings to you for confirmation. | ||
4 | Mould making | After your confirmation of our drawing, we begin to make the moulds, |
during manufacturing program, | ||
we send you mould building progress with pictures every week, for you to know our process. | ||
5 | First trial | We will make the stamping die first trial on time, then send you video or picture |
and trial samples for you to confirm. | ||
Or you can also come to our factory .And we will inspect them and issue the report. | ||
6 | Quality confirm | You will confirm our stamping die quality according to sample. |
If you need to adjust the product structure, we can help you to change it further. | ||
7 | Delivery | Ship the stamping die after it is completely OK, packed by wooden case. |
To get quick response, please contact us by mail directly
Q: How can I get quotation quickly
A: Please send your inquiry and technical details to email kellylan10@hotmail.com Our sales Consultand will contact you in 24hrs on business time.
Q: How can I get technical support from you when we are designing a new product?
A: Please feel free to contact with the same email .There will be an exclusive engineer available for you.
Q: How can I contact you when I have some suggestion about your products or service?
A: Please feel free to contact email or phone.We will follow on your suggestion and try our best to make you satisfied.
We accept your any request on shipment.By air, by sea,and by Express are acceptable.
By Express | By Air | By Sea | |
West Europe | 3-5 days | 4-6 days | 22-30days |
USA &Canada | 3-4days | 5-6 days | 16-27days |
South Asia | 3-5 days | 3-7 days | 12-20 days |
Japan&South Korea | 2-3 days | 3-4 days | 10-13 days |
Russia | -------- | --------- | 30-40 days |
Stamping die details: