Home ProductsAutomotive Stamping Dies

Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production

Certification
China Xiamen METS Industry & Trade Co., Ltd certification
China Xiamen METS Industry & Trade Co., Ltd certification
Customer Reviews
Thank you for EMTS mould solutions,It save us so much work and save more cost,And thanks for kelly's hard work,kindly opinions.

—— Good quatity,Good service

Good help for EMTS give us so much suggestion for our productions and tooling solution.Let us know more about new tooling structure and how to run well .

—— Mould solution expert

Dear Kelly, Michael needs a further uncoiler. Could you buy the same uncoiler as last time (PO-9827448) and ship it to us, please? Shipment should be by sea. Attached there is the order. Furthermore Michael asks for an other item, could you please check the price for

—— Sa

I'm Online Chat Now

Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production

Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production
Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production
Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production

Large Image :  Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production

Product Details:
Place of Origin: XIAMEN.CHINA
Brand Name: METS
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Price: Negotiable
Packaging Details: Wooden case without need of fumigation
Delivery Time: 7days-35days
Payment Terms: TT,LC
Supply Ability: 25 sets per month

Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production

Description
Type Of Die: Progressive Die Material: Brass Alloy
Mould Life: 1,000,000-3,000,000 Shots Press Force: 60Ton
Tolerance: ±0.04mm Main Tooling Material: DC53
Thickness: 0.5mm Processing Way: WEDM
High Light:

automotive metal stamping

,

automotive stamping parts

 
Precision brass leadframe production one low tungsten steel YG15 stamping progressive die

 

Metal Stamping Die Capability
 

· Die Insert Tolerence: +/-0.005mm
 

· Stamping Speed: 1000SPM/min
 

· Tooling Life: 50-300 million times
 
METS Precision-Tool uses a variety of 2D and 3D cad/cam Software to develop, design, and plan the layout of our dies. (see below for the full software list & details). We have the resources to build a die for any application. When high volumes of production are expected, we can build a dependable tool with longevity in mind. We can also produce low-cost tools for prototyping and sampling applications. Die protection is always on our mind, and DACO Precision-Tool can build in sensors that will help prevent costly damage to the die.
 

Metal stamping includes a variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stamping press, blanking, embossing, bending, flanging, and coining. This could be a single stage operation where every stroke of the press produce the desired form on the sheet metal part, or could occur through a series of stages.
 

Compound Die Stamping is the process where the die separates or blanks the part from a steel strip in one stroke. A Compound Die will perform multiple cuts or punches in one stroke, as compared to multiple strokes. This is a very cost effective method for stamping medium to high volume parts while keeping labor and die costs down. Compound Dies are often used to stamp simpler flat parts such as washers.
Here at METS Precision-Tool it’s our goal to design and build our Compound Dies to exceed 100 strokes per minute to support high volume production. We can achieve this by building in sensors and other accessories to protect the die from damage. Cycle time is always kept in mind when designing and building our Compound Die tooling. We can build the die to stamp the part at the accuracy you need.
Parts are produced when the feed system pushes (strip or coil stock) of raw material into the Compound Die; at each stroke or cycle a finished flat part will blanked or released from the raw material. The feed rate of the material is determined by the size of the part. Larger parts need more time to exit the die, where smaller parts exit quicker allowing for faster run times. Typically, compound dies do not require a cut-off station because the parts are blanked through from the strip, but many times is added to help manage scrap material. Finished parts will be removed from the die by a knock-out and will fall onto a chute or slider where they flow into the collection bin. The scrap will exit the die in strip form or in piece form depending on if you’ve included a scrap cut-off station. Scrap can be collected in bins or hoppers on the exit end of the die
 

Metal Stamped Parts & Components
We stamp metal parts ranging from small precision parts, such as electronic equipment and musical instruments, to large precision components, including processing equipment and architectural components that are decorative and functional. All-New Stamping has the capability to work in quantities from prototype runs to full production runs.
Our stock thickness for our ferrous and non-ferrous metals ranges from 0.01mm to 2mm and the stock width ranges from 10mm to 1000mm with pre-plated and finishing options. We also work with a complete range of materials to offer customers a large choice in specifications, including:
Steel
Aluminum
Stainless Steel
Plastics
Copper
Brass
Specialty Metals
 
Product description 

Mould materialD2,DC53,YG15,YG20,SKD11/51/61,SKH-9,Cr12mov, Cr12,45#, etc.
Product materialcopper, brass, metal, stainless steel, BeCu,aluminum
Processing methodsForings,CNC milling and turning,Grinding,Broaching,etc.
Processing equipmentCNC machine,Automotic lathe machine,EDM machine,Stamping lathes,Wire-cutting machine,Milling/Grinding machine,Punching/Drilling machine,Ultrasonec cleaning machine,etc.
Detection equipmentProjector,Calliper,Height gauge,Screw gauge,Hardness gauge,etc.
ApplicationElectronic:Vehicle parts,CNC machining parts,Wireless receiver metal parts, 3G/4G Modem Wireless Network metal parts,USB housing. Automotive interior parts: connector, navigation frame, car key. All kinds of connectors, digital parts.
surface treatmentPlating,Painting,Powder coating,Anodization
Vibration grinding,Polishing,Brushing.or according to customer’s requests.
Design softwarePROE ,,UG,SOLIDWORK, CAD,etc.
CavitySingle / Multi per request
Mould life1-30million shots
SpecificationMany years machining parts processing experience;Precision tolerance less than 0.001mm;Depends on customer’s requirements.
DeliveryNormally within 7-45 days (according to customer drawing, quantity and material) special case will be sooner
Payment termsT/T
Package

Wooden case or as customer's requirements

 

 
FAQ
Q: What’s your manufacture capability?
---- We use Sodick/Charmilles to frabricate die inserts,dimension we can do is +/-0.002mm.
Q: Can you make all the dimensions are according to our design/samples?
---- We can guarantee that all the dimensions are made according to your drawing/sample.Please notice that dimension tolerence we can do is +/-0.003mm.
Q: Did the stamping die suit for my press machine?
--- The stamping die is made according to your press machine’s specification.Before start making die parts,we will send the design for your approval.
Q: What’s your advantage compare with other supplier’s on the market?
---- We are stamping factory,have a team contains die design,making,maintance and stamping production.We know how important the good mold for stamping production.
---- All our engineers are with more than 10 years working experience.They are more professional on precision stamping field.
---- All the die parts we made are by Slow-speed wire EDM,can gurantee the dimension.Many of them make it by middle-speed wire EDM/fast-speed wire EDM

 
Stamping die Shows:

Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production 0Progressive Automotive Stamping Dies Low Tungsten Steel YG15 Brass Leadframe Production 1
 
 
 

Contact Details
Xiamen METS Industry & Trade Co., Ltd

Contact Person: kelly

Tel: +8613860452810

Send your inquiry directly to us (0 / 3000)